材质 | 聚乙烯 | 用途 | 通用 |
---|
长度 | 可定制m | 厂商 | 山东豪沃橡塑有限公司 |
---|
厚度 | 可定制mm | 每件重量 | 可定制kg |
---|
最大幅宽 | 可定制m | 超高密度聚乙烯吸水箱面板 | 可定制 |
---|
|
聚乙烯吸水箱面板的优点:结构设计合理,是密封型结构。它通过真空泵抽吸,使纸页从低压脱水过度到高压快速脱水,从而加速纸页干燥,增强脱水效果和纸页的成形。面板两端配有调节块,可调节纸页的吸口宽度。调节块还配有润滑装置,它可以通过清水润滑降低摩擦系数,增加网子的使用寿命,真空吸水箱由箱体和面板组成,箱体采用不锈钢制作。面板通过整体加工,采用机床和特殊加工工艺,使整体加工精度高,表面平整,光洁度高、平滑、细腻,在使用过程中可以避免细小纤维存留及顶浆现象所产生的纸病,易控制水线,避免在脱水过程中所造成不利于纸页的形成,减少纸的两面差,大大改善纸张的匀度及平滑度,使网子和脱水元件之间产生水膜,提高耐磨性,大大降低网耗和能耗
比如聚乙烯饮用水箱:本实用新型涉及一种楼房水箱,特别是中、高层楼房使用的饮用水箱。目前,中、高层楼房一般均设有屋顶水箱,现有的屋顶水箱主要有混凝土水箱和钢制水箱。混凝土水箱的主要缺点是必须与屋顶连成一体,不能搬运,重量大,箱体受水和空气侵蚀容易渗漏和污染水质,清洗也比较困难。钢制水箱由于长期放置在露天使用,容易锈蚀,密封性能差,使用寿命较短,加工搬运不方便。
本实用新型的目的是提供一种密封性能好、不渗漏、清洗方便、重量轻、能保持水质良好的饮用水箱本实用新型的箱体(1)为聚乙烯桶形整体结构,箱体(1)的上部设有带盖人孔(2)和浮球室(5),进水管(6)和溢流管(3)分别穿过浮球室(5),出水管(7)和排污管(8)位于箱体(1)下部,浮球(4)安装在浮球室15)内,以控制进水。
The advantages of polyethylene suction box panel: reasonable structure design, sealing structure. It is pumped by vacuum pump to make the paper from low pressure dehydration to high pressure dehydration, so as to accelerate the drying of the paper, enhance the effect of dehydration and the forming of the paper. Both ends of the panel are equipped with adjusting blocks, which can adjust the width of the suction mouth of the paper. The adjusting block is also equipped with a lubricating device, which can reduce the friction coefficient through water lubrication and increase the service life of the net. The vacuum suction box is composed of a box body and a panel. The box body is made of stainless steel. Panel through the whole process, the use of special tools and special processing technology, make integral high machining accuracy, surface smooth, bright and clean degree high, smooth, delicate, in use process can avoid fines left and top plasma phenomenon produced by the paper, easy to control water, avoid in the process of dehydration caused by unfavorable to the formation of the sheet, reduce the both sides of the paper is poor, Greatly improve the paper evenness and smoothness, so that the net and dehydration components between the water film, improve wear resistance, greatly reduce the net and energy consumption
The utility model relates to a building water tank, especially a drinking water tank used in middle and high-rise buildings. Current, in, high-rise building all sets housetop cistern commonly, existing housetop cistern basically has concrete cistern and steel cistern. The main shortcoming of concrete cistern is must become an organic whole with housetop continuance, cannot carry, weight is big, box body suffers water and air erosion easy leakage and pollution water quality, clean also more difficult. Steel water tank is placed in the open air for a long time because of use, easy rust, poor sealing performance, shorter service life, processing and handling is not convenient.
The purpose of the utility model is to provide a good seal performance, no leakage, convenient cleaning, light weight, can keep good water quality of drinking water tank of the utility model box body (1) for polyethylene bucket integral structure, the upper part of the body (1) is equipped with belt manhole (2) and the float chamber (5), inlet pipe (6), and overflow pipe (3) through the float chamber (5) respectively, The outlet pipe (7) and sewage pipe (8) are located at the lower part of the box body (1), and the floating ball (4) is installed in the floating ball chamber 15) to control water intake.